Table of Contents
Advertisement
MAINTENANCE WORK ON FRAME AND ENGINE
Removing rear wheel
x
9.26
–
Operate the hand brake lever repeatedly until the brake lining presses up against the
brake disc and there is a pressure point. Fix the hand brake lever while it is activated.
The brake calipers straighten.
–
Tighten screws
Guideline
Screw, front brake caliper
–
Remove the fixation of the hand brake lever.
–
Take the front from the work stand. (
–
Pull the front wheel brake and push down hard on the fork several times to align the
fork legs.
–
Tighten screws
Guideline
Screw, fork stub
–
Taking rear from work stand. (
601012-10
–
Jack up the rear of the motorcycle. (
.
M10x1.25
p. 57)
.
p. 58)
p. 58)
45 Nm
Loctite
®
(33.2 lbf ft)
M8
15 Nm
(11.1 lbf ft)
78
243™
Advertisement
Table of Contents
