Scanning The Original In Separate Batches ("Separate Scan" Setting) - Konica Minolta bizhub 361 User Manual

Basic copy operations
– For bound originals spread over two facing pages,
such as a book or magazine, position the top of the
original toward the back of this machine and align the
original with the
the original scales, as shown.
4
Close the ADF.
2.3.3

Scanning the original in separate batches ("Separate Scan" setting)

A large original can be divided and scanned in a number of batches.
A maximum of 80 original pages can be loaded into the ADF at one time. However, by specifying the
"Separate Scan" setting, an original that exceeds 80 pages can be scanned and treated as a single copy job.
In addition, the scanning location can be switched between the original glass and the ADF during the
scanning operation.
0
The loading capacity of the ADF is 80 sheets of plain paper (21-1/4 lb). Do not allow the original to be
loaded over the limit mark (▼), even though the original count is less than 80.
0
The output method used with the "Separate Scan" setting can be set to "Page Print" or "Batch Print".
As a default, "Batch Print" is selected.
0
For details on the output method used with the "Separate Scan" setting, refer to the description for
"Separate Scan Output Method" in
1
Position the original to be copied.
– For details on positioning the original, refer to
2
In the Basic screen, touch [Separate Scan].
– To cancel the "Separate Scan" setting, touch [Separate Scan] again to deselect it.
501/421/361
mark in the back-left corner of
"Copier Settings" on page
"Feeding the original" on page
11-18.
2-6.
2
2-8