Printing A Header/Footer ("Header/Footer" Function) - Konica Minolta bizhub 361 User Manual

Application functions
5
Touch [OK] and then touch [Close] in the next screen that appears.
6
Specify any other desired copy settings.
7
Using the keypad, type in the desired number of copies.
8
Press the [Start] key.
7.15.9

Printing a header/footer ("Header/Footer" function)

0
In order to use headers/footers, a header/footer must be registered in advance from Administrator
mode. For details on registering headers/footers, refer to
page 11-46.
1
Position the original to be copied.
– For details on positioning the original, refer to
2
Touch [Application], and then touch [Stamp/Composition].
3
Touch [Header/Footer].
– To cancel changes to the settings for all Application functions, press the [Reset] key. All changes to
the settings are canceled.
– If no header/footer is registered in Administrator mode, [Header/Footer] does not appear.
The Header/Footer screen appears.
501/421/361
"Specifying headers/footers" on
"Feeding the original" on page
7
2-6.
7-75