Scanning The Original In Separate Batches ("Separate Scan" Setting) - Konica Minolta bizhub 750 User Manual

Basic Copy Operations

Scanning the Original in Separate Batches ("Separate Scan" Setting)

A large original can be divided and scanned in a number of batches.
A maximum of 100 original pages can be loaded into the ADF at one time.
However, by copying with the "Separate Scan" setting, an original that ex-
ceeds 100 pages can be scanned and treated as a single copy job. In addi-
tion, the scanning location can be switched between the original glass and
the ADF during the scanning operation.
0 Do not load more than 100 sheets or so many sheets that the top of the
stack is higher than the , mark, otherwise an original misfeed or damage
to the original may occur.
0 Either "Auto Print" or "Batch Print" can be selected as the print setting
when scanning with the "Separate Scan" setting. The default setting is
"Auto Print". For details on selecting the print setting for scanning with
the "Separate Scan" setting, refer to "Copier Setting" on page 12-25.
1
Position the original to be copied.
– When using the original glass, place the first page of the original on
the original glass with the side to be copied facing down.
– When using the ADF, load the original with the pages in order and
the first page on top. Up to 100 sheets can be loaded at one time.
bizhub 750/600
3
3-11