Application functions
7.15.5
Printing repeating stamps ("Stamp Repeat" function)
1
Position the original to be copied.
–
For details on positioning the original, refer to
2
Touch [Application], and then touch [Stamp/Composition].
–
To cancel all settings for the Application functions, press the [Reset] key.
The Stamp/Composition screen appears.
3
Touch [Stamp Repeat].
The Stamp Repeat screen appears.
4
Select the desired type of repeating stamp.
–
To cancel the Stamp Repeat function, touch [No].
–
Touch [Registered Stamp] or [Preset Stamp] to display a screen containing buttons for the available
stamps. Touch the button for the desired stamp, and then touch [OK].
501/421/361
"Feeding the original" on page
7
2-6.
7-65