Konica Minolta bizhub 361 User Manual page 397

Utility mode
Expert Adjustment
Parameter
Density for Original Type
Erase
Adjustment
Finisher Ad-
justment
Copy Protect Density Adjustment
1
* Appears when Finisher FS-522 is installed with Saddle Stitcher SD-507.
2
* Appears when FS-522 is installed with Punch Unit PU-501, or when the machine is installed with Finisher
FS-523.
!
Detail
For the procedure on adjusting the finisher, refer to
[Finisher Adjustment] appears only when an optional finisher is installed.
List/Counter
Parameter
Management List
Paper Size/Type Counter
Sales Counter List
501/421/361
Description
Shift the exposure level darker/lighter within 6 lev-
els for each original type, which will be reflected to
9 levels of the Density setting available on the Ba-
sic screen.
Non-Image Area Select the condition for Non-Image Area Erase to
Erase function.
Non-Image Area Select the setting method, erasing mode, and
Erase Setting original density for the Non-Image Area Erase
function.
ADF Frame Erase Specify the erasing width for the ADF Frame Erase
function.
Half-Fold Posi- Adjust the folding position (between -5 and 5 mm)
1
tion* when printing with the "Center Staple & Fold" set-
ting.
Center Staple Po- Adjust the stapling position (between -5 and 5
1
sition* mm) when printing with the "Center Staple & Fold"
setting.
Punch Horizontal Adjust the horizontal position of the punched
Position Adjust- holes between -5 mm and 5 mm.
2
ment*
Punch Regist Loop Adjust the hole-punching shift for double-sided
2
Size Adjustment* printing and outputting cover pages between
-4 mm and 4 mm.
Adjust the density of hidden text printed as copy
protection.
Job Settings List
"Finisher Adjustment" on page
Description
The machine settings can be printed.
Store combinations of paper sizes and paper types to be
counted.
Copy counter, Print counter, Fax/Scan (Print) counter,
Fax/Scan (Read) counter, Fax TX counter, and Fax RX coun-
ter can be printed.
11
Default Setting
Text: 4
Text/Photo: 4
Photo: 4
Dot Matrix Original: 4
Except Original
Glass ×1.0
Erase Setting: Specify
How to Erase: Rectan-
gular
Original Density: (3)
3 mm
0
0
0
0
64 to 255: 64
11-39.
11-25