Placing The Original On The Original Glass - Konica Minolta bizhub 361 User Manual

Basic copy operations
2.3.2

Placing the original on the original glass

0
For details on the types of originals that can be placed on the original glass, refer to
page 6-18.
0
When placing the original on the original glass, be sure to lift open the ADF at least 20°.
If the original is placed on the original glass without the ADF being lifted at least 20°, the correct original
size may not be detected.
0
Do not place objects weighing more than 15 lb on the original glass. In addition, do not press down
extremely hard on a book spread on the original glass, otherwise the original glass may be damaged.
0
For thick books or large objects, make the copy without closing the ADF. When an original is being
scanned with the ADF open, do not look directly at the light that may shine through the original glass.
Although the light that shines through the original glass is bright, it is not a laser beam and, therefore,
is not as dangerous.
1
Lift open the ADF or the original cover.
2
Place the original face down on the original glass.
– Load the original pages so that the top of the original is toward the back or the left side of the
machine.
3
Align the original with the
– For details on selecting the original orientation, refer to
(Original Direction settings)" on page
– For details on specifying the binding margin position,
refer to
margin (Binding Position settings)" on page
– For transparent or translucent originals, place a blank
sheet of paper of the same size as the original over
the original.
501/421/361
mark in the back-left corner of the original scales.
"Selecting the position of the binding
"Selecting the original orientation
2-20.
2-22.
2
"Originals" on
Original scales
Blank sheet
of paper
2-7