Copy Operations
3.6.3
bizhub C353/C253/C203 (FE2)
Downloaded From ManualsPrinter.com Manuals
Scanning the original in separate batches ("Separate Scan" setting)
A large original can be divided and scanned in a number of batches.
A maximum of 100 original pages can be loaded into the ADF at one time. However, by specitying the
"Separate Scan" setting, an original that exceeds 100 pages can be scanned and treated as a single copy
job. In addition, the scanning location can be switched between the original glass and the ADF during the
scanning operation.
0
The loading capacity of the ADF is 100 sheets of plain paper (80 g/m
2
(210 g/m
).
0
The output method used with the "Separate Scan" setting can be set to "Page Print" or "Batch Print".
As a default, "Batch Print" is selected.
1
Position the original to be copied.
–
For details on positioning the original, refer to "Feeding the original" on page 3-28.
2
In the Basic screen, touch [Separate Scan].
–
To cancel the "Separate Scan" setting, touch [Separate Scan] again to deselect it.
2
) or 38 sheets of thick paper
3
3-31