Konica Minolta bizhub 361 User Manual page 492

Authentication Unit (IC Card Type AU-201)
2
The user is authenticated, and the Basic screen appears.
When "Card Authentication + Password" has been specified
1
Position the registered IC card on this device, and then type in the password.
2
Touch [Login] or press the [Access] key.
The user is authenticated, and the Basic screen appears.
Note
The notification beep sounds while scanning. The notification beep is canceled by touching [Login] or
pressing the [Access] key to complete authentication. This is a normal operation of the device.
If authentication fails many times, the authentication data may not be registered correctly. Therefore,
register the user again.
501/421/361
13
13-20