Selecting A Stored Zoom Ratio - Konica Minolta bizhub 361 User Manual

Basic copy operations
2.6.7

Selecting a stored zoom ratio

Copy zoom ratios that have been stored can be recalled to be used when desired.
In addition, stored copy zoom ratios can be changed.
0
As the factory default, "Full Size" is selected.
0
Touch [+] to enlarge the zoom ratio, and touch [-] to reduce the zoom ratio in 0.1% increments.
0
Stored zoom ratios can be changed to desired zoom ratios. For details on storing zoom ratios, refer to
"Storing the desired zoom ratio" on page
1
In the Basic screen, touch [Zoom].
The Zoom screen appears.
2
Touch the button for the desired zoom ratio under "Set Zoom Ratio".
3
Touch [OK].
The Basic screen appears again.
501/421/361
2-38.
2
2-37