Selecting The Position Of The Binding Margin (Binding Position Settings) - Konica Minolta bizhub 361 User Manual

Basic copy operations
2.4.6

Selecting the position of the binding margin (Binding Position settings)

If a double-sided original is loaded into the ADF, specify the position of the top of the back side of the original
by specifying the binding margin position for the original.
Note
As the factory default, "Auto" is selected as the position of the binding margin.
Original binding margin position
Original binding margin
When the original length is 11-
11/16 inch or less:
When the original length is more
than 11-11/16 inch:
501/421/361
Icon
Left
A B C
A B
Right
A B C
B C
Top
ABC
ABC
Auto
A B C
A B
ABC
ABC
ABC
ABC
A B C
A B
Description
Select this setting if the original is loaded with the
binding margin at the left.
Select this setting if the original is loaded with the
binding margin at the right.
Select this setting if the original that is loaded has
a binding margin at the top.
Select this setting to automatically select the po-
sition of the binding margin.
If the original length is 11-11/16 inch or less, a
binding position along the long side of the paper
is selected.
If the original length is more than 11-11/16 inch, a
binding position along the short side of the paper
is selected.
Note
If "Auto" is selected, the binding margin is set
at the top or at the left.
2
2-22