Oce CM5520 User Manual page 73

2
3
Enter the information for the destination, and then touch [OK].
– To check the contents of the shared folders, and then touch [Ref-
erence].
– To specify an additional address, touch [Next Destination], and
then enter the information.
The entered addresses appear under "Broadcast Destinations".
4
Touch [Scan Settings], [Original Settings] or [Communication Settings],
and then specify the desired scan settings.
– For details on the scan settings, refer to "Specifying scan and
transmission settings (Scan Settings/Original Settings/Communi-
cation Settings)" on page 2-45.
5
Load the document into the ADF or place it on the original glass.
6
Press the [Start] key in the control panel.
Scanning of the document begins, and the data is sent.
Note
Do not turn off the machine until the scan job is deleted from the Job List
screen.
!
Detail
If the computers or workgroups on the network (subnet) that this machine
belongs to is more than the numbers listed below, browsing over the net-
work may not be performed correctly.
Workgroups: 128
Computers: 128
2-38
Scanning
cm5520