Selecting A Destination With An Address Search - Oce CM5520 User Manual

2

Selecting a destination with an Address Search

If LDAP server settings are specified in Administrator mode, [Address
Search] appears in the Fax/Scan mode screen.
!
Detail
For details on specifying LDAP server settings, refer to "Enabling LDAP"
on page 4-62.
If the if "Manual Destination Input" (displayed by touching [Security Set-
tings] on the Administrator Settings screen, then [Security Details]) is set
to "Restrict", [Address Search] does not appear.
The position of [Address Search] can be changed from the User Settings
screen. For details, refer to "Default Address Book" on page 3-39.
1
Touch [Address Search] in the Fax/Scan mode screen.
2
If multiple LDAP servers are specified, select the server to be searched,
and then touch [ON].
2-30
Scanning
cm5520