Time Adjustment Setting - Oce CM5520 User Manual

4
4.17

Time Adjustment Setting

The machine's system clock can be correctly adjusted via the network. Set-
tings can be specified for the following.
Parameter
NTP Server Setting
Port Number
Reminder
After the setting is specified, touch [Set Date] (displayed by touching [1
System Settings] on the Administrator Settings screen, then [Date & Time
Setting]). The automatic adjustment will not be performed periodically.
1
Touch [5 Network Setting] in the Administrator Settings screen.
– For details on displaying the Administrator Settings screen, refer to
"Displaying the Administrator Settings screen" on page 3-7.
2
Touch [Fwd.→] in the Network Settings screen, and then touch [1 De-
tail Settings].
3
Touch [2 Time Adjustment Setting].
The Time Adjustment Setting screen appears.
4
To adjust the time, touch [ON], and then specify the desired settings.
4-110
Description
Specify the address of the NTP server. For details, refer to "NTP
server address" on page 4-111.
Specify the number of the port used for communicating with the
NTP server. To change the setting, press the [C] (clear) key, and
then use the keypad to type in the desired port number. (Range: 1
to 65535)
Network Settings
cm5520