3
If optional image controller IC-409 has been installed this parameter is
not available.
Default Scan/Fax Settings
Specify the default settings (settings selected when the [Reset] key is
pressed) for the Fax/Scan mode screen.
1
Touch [4 Scan/Fax Settings].
–
For details on displaying the User Settings screen, refer to "Display-
ing the User Settings screen" on page 3-6.
2
Press the [Default Scan/Fax Settings] key.
3
Select the default settings.
4
Touch [OK].
3-44
Specifying Utility mode parameters
cm5520