Oce CM5520 User Manual page 182

Specifying Utility mode parameters
2
Touch [TWAIN Lock Time].
3
Press the [C] (clear) key to erase the value, and then use the keypad to
specify the desired length of time (between 30 and 300 seconds).
– If a value outside the allowable range is specified, the message "In-
put error" appears. Type a value within the allowable range.
4
Touch [OK].
The TWAIN lock time is set.
Note
To finish specifying settings in the Utility mode, press the [Utility/Counter]
key. Otherwise, exit the Utility mode by touching [Close] in each screen
until the screen for the Copy, Fax/Scan or Box mode appears.
If TWAIN is being used, it is automatically unlocked at the specified time,
even if it was locked from the computer.
cm5520
3
3-43