Peer (Ipsec Settings) - Oce CM5520 User Manual

4
6
Select the length of time that communication is cut after being estab-
lished.
– To change the setting, press the [C] (clear) key, and then use the
keypad to type in the desired value.
7
Touch [OK].
– To cancel changes to the settings, touch the menu item name in the
Bookmark screen to return to the selected screen without applying
the changes to the settings.
The IPsec Settings screen appears again.

Peer (IPsec Settings)

Specify the encryption settings for each peer. Peer settings can be saved in
ten groups. Settings can be specified for the following.
Parameter
Encapsulation Mode
IP Address
Pre-Shared Key Text
Perfect Forward Secrecy
0 In order to apply the IPsec settings, settings must be specified for "IKE
Settings", "IPsec SA Settings" and "Peer".
1
Touch [IPsec Settings] in the TCP/IP Settings screen.
4-36
Description
Specify the encryption type.
Specify a setting when "Tunnel Mode" or "Transport Mode" is se-
lected under "Encapsulation Mode". Specify the peer IP address
in the IPv4 or IPv6 format.
Type in the text (64 characters or less) that is a part of the header
when data is sent.
Select whether or not to use Perfect Forward Secrecy.
Network Settings
cm5520