3
11
Touch [Password], and then type in the password, using the keyboard
that appears.
12
Touch [OK].
13
Touch [↑] or [↓].
New screen 2/2 appears.
14
Touch [Host Address], and then type in the IP address or host name.
–
To enter a host name, touch [Host Name Input], and then type in the
host name, using the keyboard that appears.
–
To enter an IP address, touch [IPv4 Address Input] or [IPv6 Address
Input], and then type in the address, using the keypad or the
number buttons that appear. Touch [←] or [→] to move the cursor
to the desired position, and then type in the numbers.
–
When the input format is switched to entering an IP address after
the host name was entered, the host name is cleared.
–
If [Host Name Input] is touched after the IP address was entered,
the entered IP address is saved and the input screen appears.
–
Type the host name and file path in uppercase letters.
15
Touch [OK].
16
Touch [File Path], and then type in the file path, using the keyboard that
appears.
–
To check the contents of the shared folders, touch [Reference].
17
Touch [OK], and then touch [OK] in the next screen that appears.
The SMB destination is registered.
3-18
Specifying Utility mode parameters
cm5520