Setup And Scanning Operations - Oce CM5520 User Manual

1
1.5

Setup and scanning operations

The settings required for using the scan functions and the general scan op-
eration are shown below.
User Settings screen in Utility mode
*Specify settings for the basic parameters such as the format in which scan data is saved.
"Customizing the Fax/Scan mode screen" on page 3-35
"Scan/Fax Settings" on page 3-40
[Network Setting] on Administrator Settings screen in Utility mode
*Specify the settings in order to use the machine on the network.
"TCP/IP Settings" on page 4-17
"NetWare Settings" on page 4-39
"http Server Settings" on page 4-46
"FTP Settings" on page 4-53
"SMB Settings" on page 4-57
"LDAP Settings" on page 4-62
"E-Mail TX (SMTP)" on page 4-72
"E-Mail RX (POP)" on page 4-81
"S/MIME Communication Settings" on page 4-87
"SNMP Settings" on page 4-92
"AppleTalk Settings" on page 4-102
"Bonjour Settings" on page 4-103
"TCP Socket Settings" on page 4-104
"Device Setting" on page 4-108
"Time Adjustment Setting" on page 4-110
"Status Notification Setting" on page 4-113
"Total Counter Notification Settings" on page 4-121
"PING Confirmation" on page 4-126
"SLP Setting" on page 4-128
"LPD Setting" on page 4-129
"Prefix/Suffix Setting" on page 4-130
"Action for Invalid Certificate" on page 4-134
One-Touch Destination/User Box Registration screen in Utility mode
*Specify e-mail addresses for e-mail transmissions, register FTP servers, and specify destination
computers.
"Registering an address book destination" on page 3-10
"Registering a group destination" on page 3-24
"Specifying e-mail settings" on page 3-27
Position the document.
Specify a recipient.
1-12
Before using scanning functions
cm5520