15.1 Group Membership
Only the system administrator can change the groups of which you are a member. However, you can be provided with
options to enable or disable your group membership. While your membership of a group is disabled, you will not receive
any group calls for that group.
15.1.1 Group Membership On/Off (Status Menu)
If the system administrator has allowed you, you can enable/disable your membership of a group through the Status
menu. When your membership of a group is disabled you do not receive group calls for that group.
1. Press the Status soft key if shown. To access the status menu during a call, press the
press the Status soft key if shown.
2. Use the
up and down
status.
3. Press the Enable or Disable soft key to change the status of your membership of that group.
Access Control
The system administrator is able to configure if you can access the Membership, State and Fallback options of a
group. If you are not configured for any groups then the Group menu is not shown.
1408/1416 Phone User Guide
IP Office 9.0
arrow keys to scroll the menu to the hunt group name and your current membership
Comments on this document? infodev@avaya.com
PHONE key and then
15-601040 Issue 07i (06 November 2015)
Groups:
Page 121