2.8 Adjust the Call Volume
While talking, you can adjust the volume of the incoming call. The volume is separately adjusted for which every device
you are currently using (handset, headset or speaker).
1. With the call connected, press the
2. Use the + plus and – minus keys to adjust the volume.
3. The display will return to normal after a few seconds.
2.9 Muting a Call
Muting a call stops the caller from hearing you. However, you can still hear them.
· The mute setting remains active even if you switch between calls using hold and or appearance buttons.
· If you change how you are listening to the call, for example switching from the handset to the speaker, the mute
setting is canceled.
1. To activate mute, press the
2. To switch mute off, press the key again.
2.10 Ending Calls
· The
DROP key can be used to end the current call to which you are talking. If the call is a conference call, it
displays a menu to allow selection of which
· If the call is connected on the phone's speaker, the
· If the call is connected on the phone's headset, the
call.
· If the call is connected on the phone's handset, replacing the handset will end the call.
1408/1416 Phone User Guide
IP Office 9.0
key.
MUTE key. The button is lit while mute is active.
conference party to drop
SPEAKER key is lit. Pressing the key again will end the call.
HEADSET key is lit. Pressing the key again will end the
Comments on this document? infodev@avaya.com
.
63
15-601040 Issue 07i (06 November 2015)
Page 38