Fairing/Exhaust System - Honda XL200 2001 Shop Manual

XL2 0 0
SERVICE INFORMATION
TROUBLESHOOTING
FRONT FAIRING
SKID PLATE
SERVICE INFORMATION
GENERAL
t
• Serious burns may result if the exhaust system is not allowed to cool before components are removed or serviced.
• This section covers removal and installation of the frame body panels and exhaust system.
• Always replace the exhaust pipe gaskets when removing the exhaust pipe from the engine.
• Loosely install all fo the exhaust pipe fasteners. Always tighten the exhaust clamps first, then tighten the mounting fasteners.
If you tighten the mounting fasteners first, the exhaust pipe may not seat properly.
• Always inspect the exhaust system for leak after installation.
TROUBLESHOOTING
Excessive exhaust noise
• Broken exhaust system
• Exhaust gas leak
Poor performance
• Deformed exhaust system
• Exhaust gas leak
• Clogged muffler
14-1 SEAT/SIDE COVER
14-1 REAR FENDER
14-2 EXHAUST SYSTEM
14-2
14.
FAIRING/
EXHAUST SYSTEM
14-3
14-4
14-4
1 4 -1
14