Seat Removal - Honda CRF70F 2009 Owner's Manual

Seat Removal

Refer to Saf ety Precautions
(5)
(7)
(6)
(1) bolts A
(2) bolts B
(3) side cover prongs
(4) rubber grommets
54
Servicing Your Honda
on page 43 .
(1)
(4)
(3)
(5) slot
(6) fuel tank bolt
(7) seat prongs
Removal
1. Remove the bolts A ( ) on each side of the
rear fender.
2. Remove the bolts B ( ) under the rear
fender.
3. Pull both side cover prongs ( ) out of the
rubber grommets ( ).
4. Slide the seat and rear fender back.
Installation
(2)
1. Align the slot ( ) on the front of the seat
with the bolt ( ) on the rear of the fuel tank
−
and insert the seat prongs ( ) under the
seat into the spaces for them in the frame.
2. Align the side cover prongs with the rubber
grommets. Press the side cover into position.
3. Install the bolts and tighten them.
1
2
3
4
5
6
7