Turbo Timer Mode - Viper 5706V Owner's Manual

Hide thumbs Also See for 5706V:
Table of Contents

Advertisement

REMOTE START ON
Turn OFF and remove the key from the ignition switch, the engine
5.
remains running.
Exit the vehicle, close all the doors and arm the system.
6.
7.
The engine turns off and after a few seconds, the
message plays to confirm. If the door is opened in Step 3 then
the engine continues to run.

Turbo Timer Mode

The system keeps the engine running for the Turbo Timer runtime and
can be activated by remote control or optional dash mounted activa-
tion button.
With the engine running, and car in neutral, set the parking
1.
brake.
Press the optional dash mounted activation button or perform the
2.
Timer Mode command (for manual transmission vehicle see previ-
ous MTS mode section).
3.
The parking lights turn on and the remote start activates the igni-
tion outputs. The
Turn OFF and remove the key from the ignition switch, the engine
4.
remains running.
Exit the vehicle, close all the doors and arm the system.
5.
6.
The engine runs for the Turbo Mode runtime.
Note
Turbo Timer must be turned on by an authorized Directed
dealer.
Note
For Turbo Timer mode on manual transmission vehicles fol-
low the directions in the MTS Mode (Manual Transmission
Start) section with the door open and in step 2 send the
Timer Mode command from the remote control.
© 2016 Directed. All rights reserved.
text and beeps play to confirm.
REMOTE START ON
REMOTE START OFF
text and beeps play to confirm.
39
39

Advertisement

Table of Contents
loading

Table of Contents