Turbo Timer Mode; Remote Start Error - Viper 4706V Owner's Manual

Hide thumbs Also See for 4706V:

Table of Contents

The engine turns off and after a few seconds, the

message plays to conﬁrm. If the door is opened in Step 3 then

the engine continues to run.

Turbo Timer Mode

The system keeps the engine running for the Turbo Timer runtime and

can be activated by remote control or optional dash mounted activa-

tion button.

With the engine running, set the parking brake.

Within 20 seconds, press the optional dash mounted activation

button or perform the Timer Mode command.

The parking lights turn on and the remote start activates the igni-

tion outputs. The

Turn Off and remove the key from the ignition switch, the engine

remains running.

Exit the vehicle, close all the doors and Lock the system.

The engine runs for the Turbo Mode runtime.

Note

Turbo Timer must be turned on by an authorized Directed

dealer.

For Turbo Timer mode on manual transmission vehicles fol-

low the directions in the Manual Transmission Start (MTS

mode) section with the door open and in step 3 send the

Timer Mode command from the remote control.

For user safety, the system must be properly conﬁgured or remote start

will not activate. If the remote start fails to active, refer to the follow-

ing table for the screens and parking light ﬂashes that will identify the

conﬁguration issue and resolution.

REMOTE START ON

REMOTE START OFF

text and beeps play to conﬁrm.

Table of Contents

Show Quick Links

Table of Contents