Temperature Reporting; Remote Start Time-Out Alert; Pit Stop Mode - Viper 5706V Owner's Manual

Hide thumbs Also See for 5706V:

Table of Contents

100°F, below 0°F, or the battery level is below 10.5V, the engine

will start and the

controls. When the Remote start runtime expires the engine shuts off,

the

REMOTE START OFF

countdown timer restarts. Smart Start is exited after the ﬁnal start.

Note

The temperature and battery thresholds can be changed by

an authorized Directed dealer if a higher or lower threshold

is desired.

Temperature Reporting

During Remote start the vehicle interior is checked regularly for tem-

perature changes. If a change in temperature is detected this report

will be sent to the remote for display. Each time the remote receives

this report it will beep, update, and display the newest temperature

information using the Temperature Gauge icon.

Note

Temperature report must be turned on by an authorized Di-

rected dealer.

During remote start a message is sent three minutes before and again

at one minute before the engine turns off. The

with tones as an alert to reset the runtime if desired.

To exit vehicle with engine running.

The system keeps the engine running during short trips into the house

or convenience store. To perform Pit Stop:

REMOTE START ON

message is sent to the remote control and the

message will be sent to the remote

RUNTIME LOW

text plays

Table of Contents