Table of Contents
Advertisement
Remote Pairing
Remote Pair is a process where the Responder LC and the system in
the vehicle learn each others encrypted identification, securing their
communication from intruders. Please note that your remote controls
come already paired from the factory. However, if you wish to add a
new remote control, the following instructions step you through pairing
the LCD 2-way remote control to your system.
Note
Both the remote control and the vehicle need to be pre-
pared to initiate pairing.
Prepare the New Remote to be Paired with the System
1.
Make sure the remote control is set for the desired Car 1 or Car
2 operation.
Press and hold the
2.
once,
Select text and beep after three seconds).
Release the
3.
SETUP REMOTE
4.
Press the
the text field.
Press and hold the
5.
then release the
6.
The remote control is now ready for pairing.
Note: The remote will exit Pairing Mode if there is no activity within
30 seconds.
Prepare the Vehicle System to be Paired with a New Remote
Open at least one of the vehicle's doors.
1.
Turn the key to the On position.
2.
28
28
button for eight seconds. The remote beeps
is displayed (If Car 2 is on, ignore the Car
MAIN MENU
button to display the Main Menu item list,
is displayed.
or
button until
AUX
button.
PAIR REMOTE
button until the remote beeps three times
is displayed in
© 2016 Directed. All rights reserved.
Advertisement
Table of Contents
