Remote Start Error
For user safety, the system must be properly configured or remote start
will not activate. If the remote start fails to active, refer to the follow-
ing table for the screens and parking light flashes that will identify the
configuration issue and resolution.
Flashes *
Possible Fault
5
Brake ON
6
Hood open
7
After performing Remote Start
command - MTS not enabled
After performing Timer Start or
Smart Start command
8
Toggle Switch OFF
None
Alarm is triggered
* Refers to the number of parking light flashes.
40
40
Solution
Release foot brake
Close hood
Enable MTS mode
Check all Solutions
Turn switch ON
Disarm or reset alarm
© 2016 Directed. All rights reserved.