Mts Mode (Manual Transmission Start) - Viper 5706V Owner's Manual

With the engine running, set the parking brake and release the
1.
foot brake.
Press the
2.
REMOTE START ON
Turn the key to off, and remove it from the ignition, the engine
3.
continues running for the programmed runtime.
Exit the vehicle and arm the alarm.
4.
Note For Pit Stop Mode on manual transmission vehicles follow
the directions in the MTS Mode (Manual Transmission Start)
section with the door open.

MTS Mode (Manual Transmission Start)

When installed into a manual transmission vehicle, the system requires
that the MTS Mode is properly set when parking. If MTS Mode is not
properly set or is defeated after being properly set, the system will not
start the engine and the
an alert.
With the engine running, place gear shifter in neutral position,
1.
press the foot brake, then set the parking brake and leave the
engine running. For Pit Stop Mode (to leave the engine running
after arming), open the driver door..
Release the foot brake. As long as the engine is running there is
2.
no time limit to perform this step.
Within 20 seconds of foot brake release, press any command
3.
button on the remote, after 20 seconds return to Step 2 (For Turbo
Timer Mode, press the optional dash mounted activation button
or send the Timer Mode command).
4. The parking lights flash five times to confirm MTS Mode en-
able and the remote start activates the ignition outputs. The
38
button, the parking lights will turn on and the
message will play on the remote control.
REMOTE START ERROR
text and tones play as
© 2016 Directed. All rights reserved.