Turbo Timer Mode - Viper 5501 Owner's Manual

Remote start and keyless entry system
Hide thumbs Also See for 5501:
Table of Contents

Advertisement

Timer Mode, press the optional dash mounted activation button
or send the Timer Mode command from the Advanced Start menu
screen).
4.
The parking lights flash 5 times to confirm MTS mode enable and
the remote start activates the ignition outputs. The
text and beeps play to confirm.
5.
Turn
Off and remove the key from the ignition switch, the engine
remains running.
Exit
the vehicle, close all the doors and Lock the system.
6.
7.
The engine turns off and after a few seconds, the
message plays to confirm. If the door is opened in Step 3 then
the engine continues to run.

Turbo Timer Mode

The system keeps the engine running for the Turbo Timer runtime and
can be activated by remote control or optional dash mounted activa-
tion button.
1.
With the engine running,
2.
Within 20 seconds,
button or perform the Timer Mode command.
3.
The parking lights turn on and the remote start activates the igni-
tion outputs. The
firm.
4.
Turn
Off and remove the key from the ignition switch, the engine
remains running.
Exit
the vehicle, close all the doors and Lock the system.
5.
6.
The engine runs for the Turbo Mode runtime.
Note
Turbo Timer must be turned on by an authorized Directed
dealer.
© 2009 Directed Electronics. All rights reserved.
set the parking brake.
press the optional dash mounted activation
remote start on
remote start on
remote start off
text and beeps play to con-
33

Advertisement

Table of Contents
loading

Table of Contents