Remote Start Features; Key Takeover; Remote Start Safelock; Disabling Remote Start - Viper 5706V Owner's Manual

Hide thumbs Also See for 5706V:

Table of Contents

Remote Start Features

When you are ready to drive.

The system keeps the engine running until the vehicle is ready to be

driven. To perform Key Takeover:

Disarm the system and enter the vehicle, do not step on the foot

brake.

Insert the key, turn it to the run position, and then step on the foot

brake, the remote start then turns off.

The parking lights turn off to indicate remote start is off, and

then after a few seconds the remote plays the

message.

The vehicle is ready to drive.

Note

Some Push-to-Start vehicles will not allow the key takeover

feature, check with your installer for more details.

Remote start safelock makes sure the doors are locked while the en-

gine is running and after, even if they are unlocked when remote start

is activated. Door locks may require additional parts and labor.

Remote start can be disabled by moving the Toggle Switch to the OFF

position. If remote start is attempted while OFF, the engine will not start

(see "Remote Start Error" on page 40). Move the switch back to the

ON position to resume normal operation.

REMOTE START OFF

Table of Contents