Button Auto Lock
When ON, the remote control buttons lock if more than 20 seconds
lapses between button presses. If a button is pressed when locked, a
fault tone is emitted. To unlock the buttons; press the
by the
button, the buttons unlock and tones play to confirm.
Note: If the button beeps have been turned OFF on the 1-way remote
control, then the remote will not respond to any button presses other
than the unlocking sequence. It is recommended to keep the button
press beeps programmed ON.
Car Select
Car 2 must first be turned ON (see Remote Features Menu under
"1-way Remote Control Configuration" on page 47 to turn ON).
Press and hold the
1.
es the LED and beeps once or twice to indicate the selected Car
is 1 or 2.
Release the
2.
beeps continue to perform Car Select. Once the car is selected
a command can be performed by pressing one of the command
buttons.
Note: If the
remote configuration mode.
46
46
button for three seconds. The remote flash-
button, then press and release while the LED and
button is held for 12 seconds, the remote will enter the
button followed
© 2016 Directed. All rights reserved.