Advanced Commands: (Level 2); Sensor Bypass; Remote Valet - Viper 5706V Owner's Manual

Advanced Commands: (Level 2)

Press and release the
pressing one of the following command buttons.

Sensor Bypass

Press and release
The parking lights flash each time this command is received to indicate
the Sensor bypass type.
Warn Away bypass: Two flashes indicates sensor Warn Away
•
zones are bypassed.
tone play to confirm.
Warn Away and Full Trigger Bypass: Three flashes indicates
•
sensor Warn Away and Full Trigger zones are bypassed.
BYPASS FULL
Sensor Bypass Off: One flash indicates sensor bypass is OFF,
•
BYPASS OFF
Note System needs to be armed to perform Sensor Bypass.
Perform arm command any time to turn Sensor Bypass OFF.

Remote Valet

Press and release
Enters (or if ON, exits) Valet Mode. The
for ON, two for OFF) play to confirm and the System Status icons
update and the Control Center LED turns on and off accordingly. See
"Valet Mode" on page 42 for more details.
18 18
button two times first, before
BYPASS WARN
, one beep and two fault tone play to confirm.
and one beep plays to confirm.
, one beep and one fault
text and beeps (one
VALET
© 2016 Directed. All rights reserved.
ALL
1
level 2