Table of Contents
Advertisement
Within five seconds press and release the Control Center button
3.
on the Control Center once.
Within five seconds, press and hold the Control Center button.
4.
The status LED will flash one time and the siren will chirp once to
confirm the system is ready for remote pairing.
Release the Control Center button and proceed below.
5.
Press the
6.
7.
Wait several seconds for feedback as the remote generates a
security encryption and sends it to the Control Center. If Pairing
is successful the siren sounds and the remote emits several tones.
The screen displays if the Pairing is successful or has failed with
corresponding text. If pairing failed, repeat step 6.
8.
Once the remote has been paired to the system, turn off the
Ignition, the siren sounds to confirm the exiting of pairing mode.
9.
To exit Pairing Mode on the remote control press the
Pairing on the System will Exit if:
•
The open door is closed.
•
The ignition is turned off.
•
There is no activity for 60 seconds.
•
The Control Center button is pressed too many times.
Demo Mode
Demo Mode plays a pre-selected group of animations as a demon-
stration tool to show friends or family. Running Demo Mode shortens
the battery life over time if used excessively.
•
SINGLE SILENT
the status screen without beeps and tones then stop.
•
SINGLE SOUND
the status screen with beeps and tones then stop.
© 2016 Directed. All rights reserved.
button on the remote control.
: The remote will display a selection of icons on
: The remote will display a selection of icons on
button
29
29
Advertisement
Table of Contents
