Getting Started; Charging The Remote Control - Viper 5706V Owner's Manual

Getting Started

Your Responder LC remote is powered by an internal rechargeable
battery that can only be serviced by an authorized Directed dealer.
Due to transit and storage time prior to your purchase, the battery
charge may have depleted. To ensure proper operation, check the
battery level and if not fully charged, use the provided cable to con-
nect to the USB port on a computer. See "Battery Information (Re-
sponder LC)" on page 53 and "Status Screen Icons" on page
8 for more information about the battery.

Charging the remote control:

1. Plug the USB end of the provided USB cable into the USB port
on a computer. Insert the micro-USB connector into the micro-
USB port located on the side of the remote control. The text field
will display
(The remote remains operational while charging and can com-
mand the system).
2. Once fully charged the text field will display
3. The remote control is then ready for use. Disconnect the cable
from the remote control end first.
Note
If the battery is excessively depleted when charging, func-
tionality may be delayed while it charges to the minimum
voltage required to operate the display, after which normal
charging resumes.
4
to indicate the remote control is charging
CHARGE
.
FULL
© 2016 Directed. All rights reserved.