Table of Contents
Advertisement
Remote Control Configuration
The remote controls have operations that can be configured to a user's
personal preferences. The following instruction directs you through the
available programming options for both remote controls.
Remote Programming
To Enter Programming: Press and hold the
onds, the transmit LED turns on to indicate the Main Menu is accessed.
To Exit Programming: Press and release the
and hold the
Remote Pairing
The following instruction will step you through the remote pairing op-
eration.
Prepare the vehicle system for pairing:
Open at least one of the vehicle's doors.
1.
Turn the key to the ON position.
2.
Within five seconds press and release one time the Control but-
3.
ton on the Control Center.
Within five seconds, press and hold the Control button. The sta-
4.
tus LED will flash one time and the siren will chirp once to confirm
the system is ready for remote pairing.
Release the Control button and proceed to next step.
5.
Prepare the remote control for pairing:
6.
Enter programming to access the Main Menu as explained previ-
ously.
Press and hold the
7.
es indicate the remote control is ready to pair.
14
button again until the transmit LED shuts off.
button for 1 second, 3 transmit LED flash-
button for eight sec-
button once then press
© 2013 Directed. All rights reserved.
Advertisement
Table of Contents
