Childproof Lock; Activating And Deactivating; The Appliance Door Is Locked - Siemens HN678G4.1 Instruction Manual

Childproof lock

en
will be ready at 10:15, but you would like it to be ready
at 12:45 instead.
Touch the "End y " field.
1.
The end time is displayed.
Using the rotary selector, set a later end time.
2.
Confirm with the Start/Stop button.
3.
The oven is on standby. The operation starts at the
appropriate time. You can see the cooking time
counting down in the status bar.
The cooking time has elapsed
A signal sounds. The oven stops heating. "Finished"
appears in the status bar. You can cancel the audible
signal early using the
0
Correcting the end time
This is possible if the oven is in standby. Use the
button to open the time-setting options menu, touch
"End y " and use the rotary selector to correct the end
time. Press the button to close the menu.
0
Cancelling the end time
This is possible if the oven is in standby. To do so, open
the time-setting options menu using the
Touch "End " and reset the End time using the rotary
y
selector. The cooking time immediately starts to count
down.
18
button.
button.
0
AChildproof lock
Your appliance is equipped with a childproof lock so
C h i l d p r o o f l o c k
that children cannot switch it on accidentally or change
any settings.

Activating and deactivating

You can activate and deactivate the childproof lock
when the appliance is switched on or off.
In each case, press the
seconds. A confirmation note appears in the display
and the / symbol appears in the status bar.

The appliance door is locked

In the basic settings, you can change the settings so
that the appliance door is also locked in addition to the
control panel.
The appliance door locks if the temperature in the
cooking compartment reaches approx. 50 °C. The
symbol is displayed in the status bar. When the oven is
switched off, the appliance door locks immediately if the
childproof lock has been activated.
0
button for approx. 4
/
H