Accessories; Accessories Included; Inserting Accessories - Siemens HN678G4.1 Instruction Manual

_Accessories

Your appliance is accompanied by a range of
A c c e s s o r i e s
accessories. Here, you can find an overview of the
accessories included and information on how to use
them correctly.

Accessories included

Your appliance is equipped with the following
accessories:
Wire rack
For ovenware, cake tins and ovenproof
dishes.
For roasts and grilled food.
The wire rack is suitable for use in the
microwave.
Universal pan
For moist cakes, pastries, frozen meals
and large roasts.
It can be used to catch dripping fat when
you are grilling directly on the wire rack.
Baking tray
For tray bakes and small baked prod-
ucts.
Meat thermometer
Enables precision roasting to your exact
requirements.
Its use is described in the relevant sec-
tion. ~ "Meat thermometer"
on page 24
--------
Only use original accessories. They are specially
adapted for your appliance.
You can buy accessories from the after-sales service,
from specialist retailers or online.
The accessories may deform when they become
Note:
hot. This does not affect their function. Once they have
cooled down again, they regain their original shape.

Inserting accessories

The cooking compartment has five shelf positions. The
shelf positions are counted from the bottom up.
When using shelf positions 1, 3, 4 and 5, always insert
the accessory between the two guide rods for a shelf
position.
The accessories can be pulled out approximately
halfway without tipping. With the pull-out rails at level 2,
you can pull the accessories out further.
Ensure that the accessory is placed behind the catch
tappet on the pull-out rail.
‚
Example in the picture: Universal pan
The pull-out rails lock in place when they are fully pulled
out. This makes it easy to place the accessories in
position. To unlock, push the pull-out rails back into the
cooking compartment with a certain amount of force.
Notes
Ensure that you always insert the accessories into
■
the cooking compartment the right way round.
Always insert the accessories fully into the cooking
■
compartment so that they do not touch the appliance
door.
Locking function
The accessories can be pulled out approximately
halfway until they lock in place. The locking function
prevents the accessories from tilting when they are
pulled out. The accessories must be inserted into the
cooking compartment correctly for the tilt protection to
work properly.
When inserting the wire rack, ensure that the catch
tappet ‚ is at the rear and is facing downwards. The
lettering "microwave" must be at the front and the outer
rail must face downwards
When inserting baking trays, ensure that the catch
tappet is at the rear and is facing downwards. The
‚
sloping edge of the accessory
forwards towards the appliance door.
Accessories en
.
¾
must be facing
ƒ
13