Event Settings; Event; Motion Settings - EverFocus EBN288/368 User Manual

7.3.

Event Settings

You can set up the Motion Detection event or Tampering Detection event to automatically notify the
users when an event occurs.

7.3.1. Event

7.3.1.1. Motion Settings

Use this page to configure the area in which motion will be detected, and set up schedules to
active alarm functions. When a motion is detected by the camera, the alarm icon
of the Live View window will turn red and blink
can be configured.
To set up a Motion Detection area:
1. Check the Enable box to enable the Motion Detection function. Select a value from the
drop-down list to set the sensitivity of the Motion Detection.
2. Select a day (Monday ~ Sunday) from the Week drop-down list to configure the schedule.
Value IP 2MP 288 Series / 3MP 368 Series
to alert the user. Up to four Motion areas
55
at the top