Important Safety Instructions - JUKI HZL-25Z Instruction Manual

"IMPORTANT SAFETY INSTRUCTIONS"

" When using an electrical appliance, basic safety precautions should always be followed, including the following."
" Read all instructions before using this sewing machine."
"DANGER-
1. " This sewing machine should never be left unattended when plugged in. Always unplug this sewing machine from
the electric outlet immediately after using and before cleaning."
2. " Always unplug before replacing light bulb. Replace bulb with same type rated 15 watts."
"WARNING-
1. "Do not allow to be used as a toy. Close attention is necessary when this sewing machine is used by or near
children."
2. "Use this sewing machine only for its intended use as described in this manual. Use only attachments
recommended by the manufacturer as contained in this manual."
3. "Never operate this sewing machine if it has a damaged cord or plug, if it is not working properly, if it has been
dropped or damaged, or dropped into water. Return the sewing machine to the nearest authorized dealer or service
center for examination, repair, electrical or mechanical adjustment."
4. "Never operate the sewing machine with any air openings blocked. Keep ventilation openings of the sewing
machine and foot controller free from the accumulation of lint, dust, and loose cloth."
5. "Never drop or insert any object into any opening."
6. "Do not use outdoors."
7. "Do not operate where aerosol (spray) products are being used or where oxygen is being administered."
8. "To disconnect, turn switch to the off ("0") position, then remove plug from outlet."
9. "Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord."
10. "Keep fingers away from all moving parts. Special care is required around the sewing machine needle."
11. "Never sew with a damaged needle plate as this can cause needle to break."
12. "Do not use bent needles."
13. "Do not pull or push fabric while stitching. It may deflect the needle causing it to break."
14. "Switch the sewing machine off ("0") when making any adjustments in the needle area, such as threading needle,
changing needle, threading bobbin, or changing presser foot, etc."
15. "Always unplug sewing machine from the electrical outlet when removing covers, lubricating, or when making any
other user servicing adjustments mentioned in the instruction manual."
"CAUTION-
"SAVE THESE INSTRUCTIONS"
FOOT CONTROLLER (120 V only)
Use Yamamoto Electric, Model YC-482E with this sewing machine.
POLARIZED PLUGS CAUTION (120 V only)
This appliance has a polarized plug (one blade wider than the other). To reduce the risk of electric shock, this
plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in
any way.
This appliance complies with EEC Directive 89/336/EEC covering the
electromagnetic compatibility.
This equipment is marked with the recycling symbol. It means that at the end of the life of the
equipment you must dispose of it separately at an appropriate collection point and not place it in
the normal domestic unsorted waste stream. This will benefit the environment for all.
(European Union only)
To reduce the risk of electric shock:"
To reduce the risk of burns, fire, electric shock, or injury to persons: "
Moving parts-To reduce risk of injury, switch off before servicing. Close cover before
operating machine."
"This product is for household use, or equivalent."
1