Table of Contents
Advertisement
What you see on the
LCD
Hang Up Phone
Insert Document
Invalid I.D. Code
Invalid Number
Invalid Passcode
Line Busy
Memory Full
Memory Overflow
No Command
No Document Stored
No Number Stored
What it means/What to do
The optional handset is off the hook. Hang it up,
making sure the upper part of the handset
presses down on the "hook" button.
There was no document in the document feeder
when you tried to send a fax or make a copy.
Place a document in the feeder and try again.
The F-Code box passcode you entered isn't valid.
Try re-entering your F-Code box passcode.
You pressed a key which has no function during
the current operation.
The protection passcode you entered isn't valid.
Repeat the operation, entering the correct protec-
tion passcode.
You tried to scan a document while the machine
is using the
for fax communication. Wait for
PC
the
to complete the fax communication, then
PC
try again.
You tried to store the document into memory,
but your fax machine doesn't have enough mem-
ory to complete the operation. Wait until your
fax has enough memory to store the document.
Also, consider contacting your authorized
Muratec dealer for a memory upgrade.
During transmission (or copying), you tried to enter
more pages into memory than your fax could store.
Press
(or
) to tell your fax to keep as many
START
COPY
pages in memory as possible, or press
delete from memory all pages stored during this
operation (but not previous operations).
You pressed
to review
REVIEW COMMANDS
upcoming commands, but your fax machine had
none stored.
You tried to print a document from memory, but
your fax machine had none stored.
You selected an autodialer number for which
there is no phone number programmed. Either
choose another autodialer number or dial a
phone number directly from the numeric keypad.
What you see on the
No Passcode
No PIN Number
No Report
PC-FAX In Use
Please Call Service
Please Remove Paper
Please Replace Drum
Please Supply Toner
Please Wait
Polling In Use
to
CANCEL
Printer In Use
Protect Doc. Stored
What it means/What to do
LCD
You tried to protect an operation but there's no
protection passcode stored in your fax machine.
Store a protection passcode in your machine,
then try protecting the operation again.
You selected "Mode1" in the
and tried to call an autodialer number in
which no
has been entered. Enter a
PIN
try again.
You requested an activity journal, but your
machine has no record of any fax jobs that have
occurred.
While a
-
feature is in use, you tried to use
PC
FAX
a fax feature. Wait for the
operation, then try again.
The printer unit of your machine has become
inoperable. Call your authorized Muratec dealer.
A paper jam has occurred. Remove the jammed
paper (review pages 3.2–3.3 if necessary).
Your drum cartridge no longer functions. Please
replace it, being sure to reset the drum counter
when you do so (see page 1.7).
The toner cartridge is empty. Replace it.
Wait until the fax machine warms up.
You tried to store the polling document in your
fax, where one already had been stored. Wait
for the fax to complete the polling operation, then
try again.
The command you're trying to enter requires the
use of the printer, which is already in use. Wait
for the fax to finish printing, then try again.
A received document was in your fax's memory
when you tried to turn off security reception or
erase the protection passcode. Print the received
document from your fax's memory, then re-try
the desired operation.
Just in case ...
mask feature
PIN
, then
PIN
to complete the
PC
3.7
Advertisement
Table of Contents
