Table of Contents
Advertisement
Setting the transmission confirmation stamp
You can set your fax machine so that it will automatically place a small stamp mark
on the front of each original document that it successfully scans.
Important: Be sure that this feature is turned off if you are sending original docu-
ments you don't want the fax to stamp.
1
Press
,
, 1, 9,
PROGRAM
J
ENTER
Stamp:
Off
Program/Enter
If the setting you see is acceptable, skip to step 3.
Otherwise, proceed to step 2.
2
To change the setting, press
PROGRAM
appears. In this example, we've chosen On.
Stamp:
On
Program/Enter
3
Press
to save the setting.
ENTER
Setting the language
While English is the language in which your machine initially is set to display mes-
sages and print reports, you can set it to "speak" French or Spanish, too! As you give
the order for the machine to change languages, it "rolls" from English to French to
Spanish and then back to English.
To make the change from one language to the next, press
¿Qué es? — or, What is it?
If, after making a language change, you're not sure which language is showing,
press
once and decide based on what results on the
PROGRAM
A Num. Une-Touche
Program./Val.
A Núm. Una-Tecla
Program./Sel.
If the language you see is the one you want, press
If you want to change languages, press
press
, # again to go to the next language in the cycle.
PROGRAM
. The
shows your fax's current setting:
LCD
once or twice until your chosen setting
, #.
PROGRAM
:
LCD
is French.
is Spanish.
to return to standby mode.
STOP
to return to standby mode and then
STOP
Printing your settings
After you have your machine set as you want, have it print a settings list. We rec-
ommend this particularly if you'll be sharing the machine with other users, who
might change the settings for one reason or another.
With this list, you can quickly confirm that all settings are as you want, without
having to go back and check them on the machine. Or, if you do need to undo some-
one else's unauthorized (or even authorized) changes, this list guides you in
returning the machine to your preferred settings.
Note: Some settings on the list affect only certain operations we'll explain later.
Please refer to the index at the end of these instructions to locate any set-
ting you don't recognize or understand.
To print the settings list, press
PROGRAM
Printing a program list
You also can have your machine print a program list. This list gives a brief summary
of the various instructions available on your fax machine, organized in a "program
tree" so you can see which key combinations produce which instructions.
Note: Some settings on the list affect only certain operations we'll explain later.
Please refer to the index at the end of these instructions to locate any set-
ting you don't recognize or understand.
To print a program list, press
PROGRAM
Note: If you have certain options installed on your machine, the list will be two
pages in length.
Beyond the basics
,
, 2, 2,
.
J
ENTER
, *, 8. Your machine will print the list.
2.7
Advertisement
Table of Contents
