Table of Contents
Advertisement
Beyond the basics
9
Press
.
ENTER
The
will display the next one-touch number.
LCD
If you do not want to enter any more one-touch numbers, press
If you do not want to enter the currently displayed one-touch number but do
want to enter another one-touch number, go back to step 2.
If you do want to enter this one-touch number, go back to step 4.
One-touch fax dialing
Now that you've stored a one-touch number or two, let's discuss the ease of using
one-touch keys to make calls. You'll probably use one-touch numbers to dial fax
calls, not voice calls, most of the time. We'll show you a bit later (this page, right
column) how to dial a one-touch voice call. But, first, here's how to dial a fax call
using a one-touch number:
1
Insert the document.
2
Adjust resolution and contrast if necessary.
3
Toggle between transmission from the feeder or from memory if necessary, by
pressing
MEMORY TRANSMIT
4
Press the one-touch key in which you've stored the number.
The machine will handle the call from here, although the exact sequence of events
will vary depending upon whether you specified transmission from memory or
transmission from the feeder:
If you specified transmission from memory:
• Your fax machine scans your document into memory first, then dials the other
fax machine.
• The
shows the Location
LCD
Katz's Cat Care
A4
Normal
Note: If the number doesn't have a Location
• When the other machine answers, your fax will transmit the document directly
from memory. (To review memory transmission, see pages 1.13–1.14.)
2.10
.
and the document's width and resolution settings:
ID
, the number appears.
ID
If you specified transmission from the feeder:
• Your fax machine dials the other fax machine.
to finish.
• When the other machine answers, your fax feeds the document through its scan-
STOP
ner, transmitting as it goes.
• The
shows the Location
LCD
Katz's Cat Care
A4
Note: If the number doesn't have a Location
One-touch phone dialing
To dial a phone call using a one-touch number, you must have an optional handset
attached to your machine. (Contact your authorized Muratec dealer for more infor-
mation on this optional item.)
Here's how to make the call:
1
Obtain a dial tone by doing one of the following:
• Lifting the handset
• Press
2
Press the one-touch key in which you've stored the number. As the machine
dials, it will show the number on the
**
9-555-2842_
Note: Remember that your fax machine's monitor speaker is not a speakerphone;
so, if you dialed by using the monitor speaker, be sure to pick up the hand-
set and speak to the other person when he/she answers!
Note: You also can use this method to dial a fax call when, for some reason, you
want to hear the other fax's answering fax tones. (Make sure there's a docu-
ment in the feeder.) When you do hear those tones, press
document in the feeder; if you'd lifted the handset, hang it up at this point.
and the document's width and resolution settings:
ID
Normal
ID
/
to use the monitor speaker.
MONITOR
CALL
:
LCD
Tel Mode
**
, the number appears.
to send the
START
Advertisement
Table of Contents
