Muratec F-98 Operating Instructions Manual page 68

Beyond the basics
5
Use the numeric keypad to enter the number exactly as your machine should
dial it, including whatever codes your phone system may require. The num-
ber can be up to 40 characters in length:
P4:Fax Number
9-5558422_
Your display can show only 20 characters at a time. To view characters beyond
those 20 (such as with an international long-distance number), press
scroll leftward or to scroll rightward.
Important: Do not press
Note: If you make a mistake or want to erase characters entered in a previ-
ous setting, press
just one character in the number, press
or to move it rightward, to that character and press
erase it. Then re-enter until the number is just as you want it.
6
Now, while you can still see the fax number on the
five times and then press
Enter Sub-Address
_
7
Use the numeric keypad to enter the
to poll. Here, we've entered 123456:
Enter Sub-Address
123456_
8
Press . The shows:
ENTER LCD
Enter Password
_
Note: If the password for the box is not entered, press
to step 10.
9
Use the numeric keypad to enter the appropriate
Here, we've entered 654321:
Enter Password
654321_
When finished, press
ENTER
2.40
.
ENTER
to erase leftward. Or, if you want to change
CANCEL
to move the cursor leftward,
, press
LCD COM
. The shows:
ENTER LCD
- sub-address for the box you want
ITU T
ENTER
- password for the box.
ITU T
.
10
If you want the transmission to begin immediately every time you press the
key, press
If you want to delay the transmission (perhaps to take advantage of lower
phone rates), press
11
There's a choice to make. Instruct your fax to carry out this delayed command
in one of the following ways:
Option 1:
to
to
Option 2:
CANCEL
-
OPTIONS
12
Press
13
The
LCD
If you do not want to enter or change any other key's programming, press
to return your machine to its usual standby mode.
If you do want to enter or change this key's programming, go back to step 3.
If you want to enter or change another key's programming, go back to step 2.
and then skip
and skip to step 13.
ENTER
- , .
COM OPTIONS ENTER
Perform the command once at a certain time on a certain day of
the month. (For example, "Do this at 5:05
To select this option, use the numeric keypad to enter the date
and time when the fax should perform the command:
Delayed
Enter Time: 30/17:05
Perform the command at a certain time each day you press the
key. (For example, "Do this at 5:05
To select this option, use the numeric keypad to enter 0, 0 (i. e.,
00), and then the time when the fax could perform the command:
Delayed
Enter Time: 00/17:05
, .
ENTER ENTER
now displays the next programmable one-touch key.
on the 30th.")
PM
today.")
PM
STOP