Table of Contents
Advertisement
Beyond the basics
If you do not want to enter or change this box's password, skip to step 14.
If you do want to enter or change this box's password, proceed to step 13.
13
Use the numeric keypad to enter this box's
password can be up to 20 characters in length and include any combination of
numbers and the * and # characters (but no other non-numerical characters).
Here, we've entered 135*7#9.
03:Password
135*7#9_
Note: If you make a mistake or want to erase previously entered characters,
press
to erase leftward. Or if you want to change just one
CANCEL
character in the password, press
to move it rightward, to that character and press
Then re-enter until the password is just as you want it.
14
Press
to save the password. The machine asks for F-Code receiving
ENTER
document storage time. The
F-Code Doc Hold Time
Hold Time(0-31):
If you do not want to set or change the storage time, skip to step 16.
If you do want to set or change the storage time, proceed to step 15.
15
Use the numeric keypad to enter a two-digit number indicating how long, in
number of days (00-31), you want your fax machine to keep received docu-
ments in this F-Code box. Here, we've entered 09, for nine days:
F-Code Doc Hold Time
Hold Time(0-31)
Note: Your fax machine can store incoming documents in F-Code boxes (up
to 30 documents) as long as 31 days, after which it automatically
erases the documents. However, if your machine has plenty of mem-
ory, you may want to override the 31-day limit in order to keep the
documents indefinitely (for you to delete manually when you choose).
If so, enter 00. (You may wish to contact your authorized Muratec
dealer regarding optional memory expansion.)
16
Press
to save the settings. The
ENTER
03:Set F-Code Box
Enter I.D. Code:0000
2.30
-
-compatible password. This
ITU
T
to move the cursor leftward, or
CANCEL
shows:
LCD
00
:09
now shows:
LCD
The machine asks for your F-Code box's four-digit security
the
.
. code for the box's security, which you use to (1) print a document any
I
D
remote F-Code-compatible fax sends to this F-Code box or (2) you enter before
you can make any changes to this F-Code box.
If you do not want to change the
If you do want to enter or change the
17
Decide on a four-digit
down, and put it in a safe place.
Important: After you proceed with step 18, you must know this code to
Important: Do not use 0000 as an
to erase it.
18
Use the numeric keypad to enter the four-digit
19
Press
ENTER
To create or modify another F-Code box, repeat steps 3-19.
To finish, press
Erasing an empty F-Code box
You can erase an empty F-Code box (if a box has document received in it, you can-
not erase it. See the first "Important" note after step 4, on the next page).
To erase an empty F-Code box:
1
Press
PROGRAM
Select F-Code Box
01:No Number Stored
If this is the F-Code box you want to erase, skip to step 3. (However, our
examples from here will refer to F-Code box 03 rather than F-Code box 01.)
2
Use the numeric keypad to enter the two-digit identifier number (01-10) of
the F-Code box you want to erase. Here, we've entered 0, 3 and see:
Select F-Code Box
03:Muratec America
3
If you change your mind and want to erase a different F-Code box, just go
back to step 2 and finish it before going on to step 4.
.
. code, skip to step 19.
I
D
.
. code, proceed to step 17.
I
D
.
. code (0001-9999) for this F-Code box. Write it
I
D
print documents sent to this F-Code box.
.
. code.
I
D
.
I
to save the F-Code box information.
.
STOP
,
, 4,
. The
shows:
E
ENTER
LCD
Select F-Code Box
or
01:Murata Machinery
.
. code. This is
I
D
. code for this F-Code box.
D
Advertisement
Table of Contents
