Muratec F-98 Operating Instructions Manual page 61

12
Use the numeric keypad to enter the day and time when the transmission
should begin, then press
ENTER
13
Press .
START
If in step 10 you chose an immediate transmission, your fax machine will begin dial-
ing. If you chose a delayed command, the machine will display "Reserved" on the
top line of the display, indicating that the machine has stored the command in
memory and will perform it later.
F-Code polling
1
Press - five times and then press
COM OPTIONS
Enter Sub-Address
_
2
Use the numeric keypad to enter the appropriate sub-address.
In this example, we've entered 123456.
Enter Sub-Address
123456_
Note: If you make a mistake, press
rect number.
3
Press . The will show:
ENTER LCD
Enter Password
_
Note: If you know that this sub-address does not have a password, skip to
step 5.
4
Use the numeric keypad to enter the appropriate password. In this example,
we've entered 654321.
Enter Password
654321_
5
Press . The will show:
ENTER LCD
Enter Fax Number
_
6
Enter the fax number either by pressing a one-touch key, entering a speed-
dial number or dialing from the numeric keypad. Do not press
.
.
ENTER
to back up, then enter the cor-
CANCEL
START
7
What you do now depends upon when you want the polling to begin.
• To have it begin now, skip to step 10.
• To delay it, proceed to step 8.
8
Press -
COM OPTIONS
Delayed
Enter Time: 15/17:05
9
Use the numeric keypad to enter the day and time when the polling should
begin, then press
10
Press .
START
If in step 7 you chose an immediate polling, your fax machine will begin dialing. If
you chose a delayed command, the machine will display "Reserved" on the top line
of the display, indicating that the machine has stored the command in memory and
will perform it later.
.
, . The will show:
ENTER LCD
.
ENTER
Beyond the basics
2.33