Table of Contents
Advertisement
7
The machine now is prompting you for a name for this F-Code box. The
shows:
03:Box Name:Upper
_
If you do not want to enter or change this F-Code box's name, skip to step 9.
If you do want to enter or change this F-Code box's name, proceed to step 8.
8
An F-Code box's name may be up to 16 characters in length. You enter the
name the same way you entered your fax name during EasyStart. We'll
review the process here. (If you're changing a previously entered name, see
the note at the end of this step.)
Important: As in EasyStart, you enter letters and other non-numeric char-
acters through the one-touch keys.
03:Box Name:Upper
_
The word "Upper" means the machine is currently set for entering only
upper-case letters. If you press R, the machine will see it as an
To change it so that pressing a one-touch key will produce a lower-case letter
rather than an upper-case letter, press
03:Box Name:Lower
_
This means pressing one-touch keys will enter lower-case letters. For exam-
ple, pressing
, will produce an r (not an
R
To switch back for upper-case entries, press
To enter space, punctuation and symbols, press
enter the blue characters shown on the one-touch keypad.
To use the
function to enter a wide variety of characters, please review
CODE
the explanation on page 2.3. Most of the time, you will probably find the
abc and
keys to be sufficient.
SYMBOL
Note: If you make a mistake or want to erase characters entered in a previ-
ous setting, press
CANCEL
just one character in the name, press
or
to move it rightward, to that character and press
erase it. Then re-enter until the name is just as you want it.
03:Box Name:Upper
or
Muratec America_
(not an r).
R
2/abc. The display will change to:
U
) on the display.
R
1/
.
U
ABC
3/
. This lets you
U
SYMBOL
to erase leftward. Or, if you want to change
to move the cursor leftward,
CANCEL
9
Press
to save the box's name and continue. The
LCD
ENTER
03:Sub-Address No.
_
The fax machine now asks for this F-Code box's sub-address. This is the
essential
-
ITU
T
order to communicate with any remote F-Code compatible fax.
If you do not wish to change an existing sub-address, skip to step 11.
If you do wish to enter or change the sub-address, proceed to step 10.
10
Use the numeric keypad to enter the sub-address to identify this F-Code box.
The sub-address can be up to 20 characters in length and include any combi-
nation of numbers and the * and # characters (but no other non-numerical
characters). (If you're changing a previously entered sub-address, see the note
at the end of this step.)
03:Sub-Address No.
654321_
Note: The sub-address must be unique to this F-Code box. No other
F-Code box in this fax machine can have the same sub-address.
Note: If you make a mistake or want to erase characters in a previous set-
ting, press
one character in the number, press
to move it rightward, to that character and press
it. Then re-enter until the number is just as you want it.
11
Press
to save the sub-address.
ENTER
Note: If you entered a sub-address already being used by another F-Code
box, the machine will beep and briefly display the following:
03:Sub-Address No.
Sub-Address In Use
,
ABC
The machine now returns you to step 10. Please enter a different
number for your F-Code box's sub-address.
12
Next, the machine asks for your F-Code box's password. This is the password
for
-
-compatible F-Code fax transactions. The
ITU
T
03:Password
to
_
Note: You don't need to have a password for the F-Code box. However, using
a password will make your F-Code communication much more secure.
03:Sub-Address No.
or
123456_
-standard, all-numerical identifier which you must enter in
to erase leftward. Or if you want to change just
CANCEL
to move the cursor leftward, or
03:Password
or
123456789*#_
Beyond the basics
shows:
LCD
to erase
CANCEL
shows:
LCD
2.29
Advertisement
Table of Contents
