Table of Contents
Advertisement
4
The
now asks you to enter your fax number as you want it to appear on
LCD
other fax machines' displays or printouts. The fax industry term for this num-
ber is Subscriber
.
ID
Your Fax Number
5
Use the numeric keypad to enter the desired number. To put in a dash for
easier reading, as shown here, press
may contain up to 20 characters (numbers and dashes).
Your Fax Number
972-555-5525_
Note: If you make a mistake, press
to change just one character in the number, press
sor leftward, or
, to move it rightward, to that character and press
to erase it. Then re-enter until the fax number is just as you
CANCEL
want it.
6
Press
to save the number.
ENTER
7
The
now asks you to enter the name you want to appear at the top of
LCD
faxes you send. The name may be up to 22 characters in length.
Important: You enter letters and other non-numeric characters through the
one-touch keys.
Your Name
:Upper
_
The word "Upper" means the machine is currently set for entering only
upper-case letters. If you press
R
To change it so that pressing a one-touch key will produce a lower-case letter
rather than an upper-case letter, press
Your Name
:Lower
_
This means pressing one-touch keys will enter lower-case letters: pressing
will produce an r (not an
) on the display.
R
To switch back for upper-case entries, press
To enter spaces, punctuation and symbols, press
enter the blue characters shown on the one-touch keypad.
/
once. The number
HOLD
DIALING OPTIONS
to erase leftward. Or, if you want
CANCEL
to move the cur-
, the machine will see it as an
(not an r).
R
2/abc. The display will change to:
U
1/
.
U
ABC
3/
. This lets you
U
SYMBOL
In "Beyond the Basics," we'll show you how to use the
a wide variety of characters (see page 2.3). For now, however, become familiar
with the
, abc and
ABC
Note: If you make a mistake, press
to change just one character in the name, press
leftward, or
to erase it. Then re-enter until the name is just as you want it.
CEL
8
Press
to save the setting and continue.
ENTER
9
The
now indicates the type of dialing, tone or pulse, for which your fax
LCD
machine is set:
Phone Type:
Program/Enter
If the setting you see is acceptable, skip to step 11.
Otherwise, proceed to step 10.
10
To change the setting, press
(here, we've changed the setting to Pulse mode):
Phone Type:
Program/Enter
11
Press
to save the setting.
ENTER
You're all done!
Muratec's entire current line, as well as every Muratec fax machine introduced in the
last decade, is fully tested and Year 2000 ready.
Year 2000 compliance means that all programming or other actions needed to support
the correct processing of date-related fields prior to, during and beyond the turn of the
century are completed have been tested and validated for the accurate and correct
R
processing of date fields and related logic for Muratec products.
CODE
keys.
SYMBOL
to erase leftward. Or, if you want
CANCEL
, to move it rightward, to that character and press
Tone
once or twice until your choice appears
PROGRAM
Pulse
Year 2000 compliance
Getting started
function to enter
to move the cursor
-
CAN
1.11
Advertisement
Table of Contents
