Muratec F-98 Operating Instructions Manual page 78

Beyond the basics
4
The now asks whether you want to enter a number:
LCD
Set BlockJunk Dial
Program/Enter
If you want to enter or modify a number, press
Otherwise, press
PROGRAM
5
Depending on whether you have already entered at least one number into the
blocked numbers list, the display shows one of the following:
Enter Fax Number
01:_
If you have not entered any numbers in the blocked numbers list, skip to step 7.
Otherwise, proceed to step 6.
6
If you want to modify an existing entry in the blocked numbers list, press
repeatedly until you see the number you want to modify.
PROGRAM
... or ...
If you want to enter a new number in an already-started blocked numbers
list, press repeatedly until you find an empty position in the list (as
PROGRAM
in the first display in step 5).
Note: To clear a number from the list, see "Clearing a number from the
blocked numbers list," right column.
7
Use the numeric keypad to enter the last eight characters of a fax number you
want to block. For example, if you want to block a fax from someone with a
Subscriber of 972-555-3038, you should enter 5, 5, 5, -, 3, 0, 3, 8:
ID
Enter Fax Number
01:555-3038
To change only a specific digit of an entry, press
to move rightward until the cursor is under the digit, then use the numeric
keypad to enter the correct digit.
8
Press to save the setting. The display will show the next "slot" in the
ENTER
blocked numbers list.
If you do not want to enter or change a number for this slot, proceed to step 9.
If you do want to enter or change a number for this slot, repeat steps 5–8.
9
Press . The display now asks whether you want to print the list.
STOP
Print BlockJunk Dial
Enter/Stop
2.50
and proceed to step 5.
ENTER
and skip to step 10.
Select BlockJunk No.
or
01:555-2971
to move leftward or
10
If you do want to print the list, press
If you don't want to print it, press
normal standby mode.
Clearing a number from the blocked numbers list
To clear a number from the list:
1
Press , , 1, 1,
PROGRAM J ENTER
If your Block Junk Fax setting is either Mode2 or Mode3, skip to step 3.
Block Junk Fax:Off
Program/Enter
2
Press until you see your preference, Mode2 or Mode3.
PROGRAM
Block Junk Fax:Mode2
Program/Enter
3
Press , . The display shows:
ENTER ENTER
Select BlockJunk No.
01:555-2971
If this is the number you want to clear, skip to step 5.
Otherwise, proceed to step 4.
4
Press repeatedly until you see the number you want to clear.
PROGRAM
5
Press to clear the number.
CANCEL
To clear another number from the blocked numbers list, repeat steps 4–5.
Otherwise, proceed to step 6.
6
Press . The display now asks whether you want to print the blocked
STOP
numbers list.
Print BlockJunk Dial
Enter/Stop
If you do want to print the list, press
Otherwise, press to return your machine to its normal standby mode.
STOP
and your machine will print it.
ENTER
and your machine will return to its
STOP
.
and your machine will print it.
ENTER