Gigaset dx800a Instruction Manual page 62

Using lists
List entry
New messages are displayed at the top.
Example of list entries:
All Calls
™
...12345678901
Frank
for IP1
07/19 03:40pm
View
u
List type (in header)
u
The entry status (only in the list of missed
calls)
Bold: New entry
u
Number of caller or name replacement
from directory
u
CNIP information , i.e. name (location)
that is registered with your network pro-
vider, otherwise Not available
u
Name of connection to which the
missed/accepted call was directed (for
receive connection), or via which the out-
going call was dialled (via send connec-
tion). The connection name you have
assigned is displayed where available.
Otherwise, the standard name is used.
u
Date and time of call (if set).
u
Type of entry:
– Accepted calls ( ™
– Missed calls (
– Outgoing calls (
– Calls recorded by the answering
machine (Ã)
60
V
Options
›
)
)
š
)
Please note
Multiple calls from the same number are
stored once in the missed calls list (the
latest call). The number of calls from this
number is shown in brackets after the
entry.
One Private entry is created for all
missed calls for which the number of the
caller was withheld.
Equally, one Not available entry is cre-
ated for every call for which the number
was not transferred.
Pick up the receiver or press the handsfree
key d to call the selected caller back.
§View§
Select the display key to access addi-
tional information, including for example
the number linked to the name. If you have
CNIP, then the name and town that is regis-
tered with your network provider for this
number is displayed. If the name and town
are not shown, it means that the caller has
not requested Calling Line Identification or
that the number has been withheld.
§Options§
display key to select the fol-
Use the
lowing options:
Copy to Directory
Copy number to the directory.
Delete Entry
Delete selected entry.
Delete List
Delete all entries.
When you quit the call lists, all entries are set
to the status "old", i.e., the next time you call
up the list, they will no longer be shown in
bold.
Please note
In the case of each internal party (base,
handset), only those received/missed
calls directed to its receive connection
are shown.
If you have configured Select at each call
for all internal parties, no calls will be
stored in outgoing calls list.